Sonnet Echo Express SE II Guide de l'utilisateur

User’s Guide for Echo™ Express SE Thunderbolt™ Expansion Chassis for PCIe Cards

6Chapter 3 – PCIe Card Installation StepsFigure 8Figure 7 11. Using two of the screws you removed previously, secure the back edge of the Echo Expres

7Chapter 4 – Verify Connections Using System InformationFigure 9Figure 10A – Verify the Echo Express SE is Recognized 1. With the Echo chassis powere

Chapter 5 – Tips, General Information, and Known IssuesKNOWN ISSUESNot all PCIe Cards Will Perform at 100% Thunderbolt’s PCIe bandwidth is limited to

Chapter 6 – Specifications, Precautions, FCC Compliance, and Support InformationWarnings (continued)• Follow the instructions in this manual carefully

©2012 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Creativity Stored Here, Simply Fast, the Simply Fast logotype, Alleg

1 Introduction, System Requirements... 12 Echo Express SE

This page left intentionally blank

1Chapter 1 – Introduction, System RequirementsIntroductionCongratulations on your purchase! The Echo Express SE is a Thunderbolt expansion system for

2Echo Express SE Exterior1 – Power Indicator This indicator lights when the Echo Express SE is powered, the Thunderbolt cable between Echo Express an

3Echo Express SE Inner Assembly1 – PCIe Slot This slot accepts up to an x8 mechanical, half-length (up to 6.6" long), full- height, single-width

4Chapter 3 – PCIe Card Installation StepsFigure 1 1. Remove the Echo Express SE chassis from its packaging, and then set it upside-down on a soft, fla

5Chapter 3 – PCIe Card Installation Steps 6. Remove and set aside the screw used to secure a PCIe card from the Echo Express SE chassis’ inner assemb